Setup SX.org proxy in Indigo

Последнее изменение: 1 месяц назад

You need to register on the Website SX.org

Then you need to confirm the email

To create a proxy port, go to the “Create a new port” tab

In the first step of creating a proxy server, you will be asked to select the country and type of proxy server.

Above the country selection field, you can specify the type of IP address: mobile, corporate, or home (1). Please note that all 3 types are selected by default, but for the most stable operation, we recommend choosing only one of these types.

You can find the country you are interested in in the field “Search by country” (2). Just start typing the name, and the dynamic filter will display the most similar results.

After selecting a country, you can then select the region and city you are interested in. If you don't know which region your chosen city is located in, don't worry, when you select a city, the region will be selected automatically.

Next, you can specify the ASN (Internet Service Provider). We recommend you to set this parameter by default.

In the last step, you can select the name of your proxy server, the number, the type of rotation, and the type of authorization.

Then, you can select the IP adress disconnection behavior (3).

“Save connection" (default) - if the current IP address stops working, the system will replace it with the nearest similar IP address from the same subnet or with the same ASN.

“Disconnect" - If the IP address is disconnected, the connection will be terminated until the current IP address is connected to the network again.

“Rotate" - with this behavior, the IP address changes.

Click "Create a new port" (5).

Congratulations, you have created a port!

Now you need to select the proxy type (6)

Then copy the proxy URL, login and password (7)